Home Improvement Outdoor

How to Use Liquid Rubber Cool Foot Deck Coating to Keep the Temperature Down This Summer

As summer temperatures rise, so does the heat in our homes and workplaces. This not only leads to discomfort but also increased cooling costs.This article will introduce you to a revolutionary product that can help you resolve this problem: Liquid Rubber Cool Foot Deck Coating. This high-performance elastomeric coating not only waterproofs your surfaces but also reduces heat transfer, keeping your premises cool during the sweltering summer months.

Cool Foot Deck Liquid Rubber Coating Overview

The Liquid Rubber Cool Foot Deck Coating is an acrylic, elastomeric coating designed to minimize heat transfer by up to 35% when compared to regular paint. When cured, it becomes a durable, seamless, and colored waterproof membrane.

This coating is free from solvents and is non-toxic, VOC-free, and non-flammable. The cured membrane exhibits excellent solar reflectivity and UV stability, making it a perfect choice for outdoor surfaces like decks, docks, handrails, fences, and concrete areas.

The Technology Behind It

The technology behind this coating is quite fascinating. It employs glass bead technology to create a surface that cools more efficiently than its competitors. This makes it an ideal solution for decks, railings, and other surfaces that come into direct contact with people, ultimately enhancing comfort and protection.

Application of the Coating

For the best results, it is recommended to apply the Liquid Rubber Cool Foot Deck Coating at a minimum thickness of one gallon per 50 sq ft. This would typically require around 3-4 heavy coats. High traffic areas and porous substrates may require a bit more, about one gallon per 30 sq ft.

Preparing the Surface

Before applying the coating, ensure your surface is clean, dry, and free of any contaminants. This includes dirt, loose paint, rust, oil, grease, and other substances that could interfere with the adhesion of the coating. If you’re working with a concrete surface, it should be etched, power washed, and fully dried. In the case of a wood surface, any mildew and organic growth need to be removed using a Deck and Patio Cleaner.

Masking and Detail Work

Once your surface is prepared, use masking tape to block off areas that are not to receive the coating. Also, make sure to bridge seams, flashing, cracks, joints, and Geo-Textiles are applied via the 3-course method: Multi-Purpose Primer, Geo-Textile, Multi-Purpose Primer.

Primer Application

Apply Multi-Purpose Primer to the entire surface with a 3/8″ (10mm) microfiber roller. corners, and between wood boards, use nylon/polyester brushes, Allow the primer to dry until it is dry to the touch, which typically takes about 1-2 hours.

Applying the Coating

After the primer is dry, you can start applying the Cool Foot Deck Coating. Apply it in multiple Dry between coats for approximately 4-6 hours. Be sure to seal around posts and other fixtures.

Inspection and Protection

Once the coating is dry, inspect the surface for any pinholes, blisters, voids, thin spots, or other defects. Repair these areas as necessary. You should allow 72 hours after the last coat for light foot traffic and 5-7 days before placing furniture on the coating.

Clean Up

Cleaning up is straightforward. Remove the tape while the coating is still wet, and close the container to preserve any leftover product. If you spill the product, clean it immediately with soap and water.

Why Choose Liquid Rubber Cool Foot Deck Coating

The Liquid Rubber Cool Foot Deck Coating is a modern-day solution that combines ease of use, affordability, and reliability. It is VOC-free and non-toxic, making it safe for use around children and pets. With this product, you can easily transform your hot and uncomfortable decks, docks, or patios into cool, comfortable spaces, even in the peak of summer.

Remember, if you are dealing with extreme temperatures, high enough to literally cook eggs, then it is time you considered using Liquid Rubber Cool Foot Deck Coating to cool down your property.

Let’s Wrap Things Up

In conclusion, the Liquid Rubber Cool Foot Deck Coating is an effective solution for keeping your property cool and comfortable during the hot summer months. It’s easy to apply, safe, and provides excellent results. So, why not give it a try and enjoy the summer without the heat?


You may also like...