how to replace door knob without screws

let’s get started on this fun and easy DIY project that will have your doors looking fresh in no time. Let’s dive right in!

1. New Door Knob: Make sure you have a replacement door knob that does not require any screws for installation. Look for options specifically designed for easy installation.
2. Screwdriver: Although we mentioned earlier that you won’t be needing screws, having a screwdriver is still important. It will come in handy when removing the old door knob and installing the new one.
3. Allen Wrench or Hex Key: Some modern doorknobs may use an allen wrench or hex key instead of screws. Check if your new doorknob requires one and ensure you have it ready.
4. Tape Measure: To ensure proper alignment and fit, grab a tape measure to take accurate measurements of your door thickness and backset (the distance from the edge of the door to the center of the borehole).
5. Lubricant: Having some lubricant on hand can make it easier to remove stubborn components during disassembly or assembly.
Remember, having these tools at hand will help streamline your process when replacing your doorknob without screws!

Step One: Remove the Old Door Knob

Removing an old door knob may seem like a daunting task, but with the right tools and a little patience, it can be done easily. So let’s get started!
First, gather all the necessary items you will need for this step. You’ll want to have a screwdriver (either Phillips or flathead), pliers, and possibly a small hammer on hand.
Now that you’re equipped with your tools, take a moment to examine the door knob. Look for any visible screws that are holding it in place. If there are screws present, grab your screwdriver and begin loosening them by turning counterclockwise.
In some cases, however, there might not be any visible screws on the exterior of the door knob. Don’t panic! This just means that there is likely hidden hardware holding it together.

To find these hidden fasteners, locate a small slot or hole on one side of the doorknob assembly. Insert your screwdriver into this opening and gently pry off any covers or plates concealing the screws inside.
Once you’ve successfully removed all visible screws or uncovered hidden ones, hold onto both sides of the doorknob firmly with your hands. Give it a gentle tug in opposite directions to separate it from its housing.
And voila! The old door knob should now be free from its position. Keep in mind that every doorknob is unique and may require slightly different steps for removal, so always consult manufacturer instructions if available.
With Step One complete, we’re well on our way to upgrading our doors with shiny new knobs! Stay tuned for Step Two: Install the New Door Knob coming up next!

Step Two: Install the New Door Knob

Now that you have successfully removed the old door knob, it’s time to install the new one! Installing a door knob without screws may seem tricky, but with the right technique, it can be a breeze.
Take your new door knob and examine it closely. Look for any screws or attachments that need to be removed before installation. Some knobs may come with small clips that need to be detached – keep an eye out for those!
Next, align the base of the new knob with the latch mechanism on your door. Make sure everything lines up properly before proceeding. Once aligned, firmly press down on the base until it sits flush against the surface of the door.
After securing the base in place, take hold of both sides of your doorknob and twist them counterclockwise simultaneously. This will engage and lock them into position.
Give your newly installed doorknob a few test turns to ensure smooth operation. If everything feels secure and functions correctly, congratulations – you’ve successfully installed a new door knob without using any screws!
Remember that each brand and model might have its own unique installation process or additional steps required. Always refer to manufacturer instructions if needed.
With these simple steps, you’ll have replaced your old door knob in no time! Stay tuned for Step Three: Attach The New Door Knob To The Door coming up next!


 Replacing a door knob without screws may seem like a daunting task, but with the right tools and steps, it can be easily accomplished. By following these simple instructions, you’ll be able to update your door knobs in no time.
Remember that each brand and model may have slightly different installation methods, so always refer to any included instructions if available. Additionally, it’s important to exercise caution when working with sharp objects such as screwdrivers or knives.

You may also like...